Wireless Pressure Monitoring

The Telog PR-32 is a versatile instrument intended to monitor water system pressures or water levels (e.g. underground aquifers, surface reservoirs or water tower levels). It is available with a choice of pressure sensor ranges, from 1 to 500 PSI and cable lengths up to 500 feet.

You can configure the Telog PR-32 to call its host application on a schedule (e.g. once per day; every four hours, etc.) and/or on alarm (e.g. in response to a high or low pressure or level exceedance condition). The recorder can sample the pressure sensor up to 4 times/second and store the data statistics (min, average, maximum or totals) at user defined intervals (e.g. five minutes, one minute, etc.). Data loss is not a concern because the recorder stores over 80,000 interval statistics before overwriting the oldest data with new.

The Telog PR-32 uses a Telog proprietary, low power m2m cellular modem certified for operation on the Sprint, Verizon Wireless and Bell Canada cellular networks. The cellular modem, antenna, pressure signal conditioning, data recorder and battery are integrated into a small, environmentally rugged package making the Telog PR-32 easy to install and put into service.

The recorder operates up to five years making on average two calls per day from its user replaceable ‘D’ cell lithium battery.

Telog Enterprise and Telogers for Windows host application software support the PR-32. However, Telog also offers a Cloud Solution for users who prefer to outsource the computer data collection and management tasks providing end-use information on a secure website.

 

Specifications

Recorder
Model: Telog PR-32
Type: Single channel pressure recorder

Measurement    
Resolution: 12 bits (0.025%)
Accuracy: ±0.075% of full scale at 23°C; ±75 ppm/°C
Temperature range: -40°C to +65°C

Recording    
-- Sample rate: 4 per second to 1 per 8 hours; programmable
-- Clock accuracy: 0.01%
-- Memory size: 128 kbytes; 80,000 data values
-- Storage method: Wrap around (first-in; first-out) 

Communication    
-- Local: RS-232, 4 pin circular connector rated IP-67; Auto-selected baud rate to 19.2K
-- Cellular: Internal Telog WM/C cellular modem 1xRTT via CDMA; certified on Sprint, Verizon Wireless and Bell Canada

Battery            
-- Factory installed single 3.6V Lithium D cell; Saft LSH 20 or Equal, user replaceable
-- Life: 4000 data calls to host Computer
-- Examples: 5 years @ 2 calls/day   |   1 year @ 10 calls/day

Enclosure
-- Size: 6.30 x 3.2 x  2.2 inches; LxWxH
-- Weight: 2 lbs.
-- Material: Polycarbonate

Environmental
-- Temperature: -40 to 70º C
-- Rating: NEMA 4x (IP66) 

Sensor
Model: Telog PT-30b
Type: Strain gauge pressure sensor

Range
-- Selectable 1, 2.5, 5, 10, 15, 30, 50, 100, 200, 300, 500 PSI

Accuracy    
-- Non-linearity: ±0.15% of span; BFSL
-- Repeatability: ±0.03% of span; BFSL
-- Hysterisis: ±0.03% of span; BFSL

Temperature Range    
-20°C to 60°C

Temperature Effect    
-- ±0.02%/°C (0 to 30°C)

Pressure Over Range    
-- Proof pressure: 4 X full scale up to 5 PSI ranges; 3 X for higher ranges

Physical    
-- Pressure fitting: 1/4NPT female with depth nose cone
-- Environmental: Submersible to NEMA 6P (IP-68)
-- Sensor length: 4.5”
-- Sensor diameter (max): 1.0”
-- Sensor body material: 316 stainless steel
-- Cable: Vented Polyurethane 0.275” diameter
-- Cable weight: 41 g/m (0.027 lbs./ft)

Support Software
-- Telog Online (Data Hosted Solution)
-- Telogers Enterprise
-- Telogers for Windows

Get the Telog PR-32

Request a Quote